Knight School of Welding costs $4,100 for its MIG, Stick, and TIG programs and $5,500 for its 6G Pipe Uphill and TIG Stainless Pipe programs as of August 10, 2026. Day and evening formats have the same tuition. If you pay the full tuition by credit or debit card, Knight’s published 3.5% card charge raises those totals to $4,243.50 or $5,692.50 before any separately quoted testing, equipment, travel, or lodging costs. This guide separates confirmed school prices from costs you still need to verify before enrolling.
Last updated: August 10, 2026 — tuition, schedules, card fees, AWS Certified Welder fees, VA benefits, and Indiana Workforce Ready Grant information were rechecked against current sources.
Quick Answer
Knight School of Welding currently lists $4,100 for its MIG, Stick, and TIG programs and $5,500 for 6G Pipe Uphill or TIG Stainless Pipe. Day and evening formats cost the same. Your final bill may rise if you pay by card, add certification testing, or need travel, lodging, or personal gear.
Key Takeaways
- MIG, Stick, and TIG training currently costs $4,100 per program.
- 6G Pipe Uphill and TIG Stainless Pipe training currently costs $5,500 per program.
- Day and evening students pay the same tuition, but evening programs take twice as many weeks.
- Knight publishes a 3.5% charge on credit and debit card transactions.
- Certification testing, retesting, supplies, and refund terms require a separate written quote or enrollment agreement.
- Knight says eligible students in approved programs may use VA education benefits, and Indiana’s current Workforce Ready Grant provider list includes Knight under Welding Training.
How Much Does Knight School of Welding Cost by Program?
The official Knight School of Welding program page lists flat tuition for each course. The day and evening versions of a program have the same price.
| Program | Day Format | Evening Format | Published Tuition |
|---|---|---|---|
| GMAW MIG Welding | 4 weeks | 8 weeks | $4,100 |
| SMAW Stick Welding | 4 weeks | 8 weeks | $4,100 |
| GTAW TIG Welding | 4 weeks | 8 weeks | $4,100 |
| SMAW 6G Pipe Uphill | 5 weeks | 10 weeks | $5,500 |
| GTAW TIG Stainless Pipe | 5 weeks | 10 weeks | $5,500 |
The current published tuition is $4,100 for each basic MIG, Stick, or TIG program and $5,500 for either advanced pipe program.
The basic programs are designed to build entry-level skills in one welding process. The advanced pipe courses are shorter, specialized programs intended for students who already have relevant welding ability.
Note: Knight recommends the 6G Pipe Uphill course for welders who can pass a 3/8-inch plate open-root guided bend test. A beginner may need Stick training or additional practice before attempting the pipe course.
Products Worth Considering
🧲 Sticks to Toolboxes & Welders – Heavy-duty magnetic welding chart adheres to metal surfaces like your welding table, toolbox, or wall for instant reference while working.
Comprehensive 3‑in‑1 reference pack covers MIG, TIG and Stick welding parameters—ideal for welders who work across multiple processes
Richard Finch, Welder's Handbook: A Complete Guide to MIG, TIG, Arc & Oxyacetylene Welding, "Completely Revised and Updated Edition!" paperback
Additional Costs: Tools, Gear, and Materials
Knight’s public program page does not provide a full itemized list of included helmets, gloves, tools, consumables, books, test coupons, or certification fees. For that reason, a responsible total-cost estimate should not attach invented dollar ranges to those items.
The school’s official About page does publish one important extra charge: Knight adds 3.5% to credit and debit card transactions.
| Example | Tuition | 3.5% Card Charge | Card-Payment Total |
|---|---|---|---|
| MIG, Stick, or TIG program | $4,100 | $143.50 | $4,243.50 |
| 6G Pipe or TIG Stainless Pipe | $5,500 | $192.50 | $5,692.50 |
These examples assume that the full tuition amount is paid by credit or debit card. They do not include testing, retesting, transportation, lodging, missed work, or any personal equipment that may be required.
Products Worth Considering
Comprehensive Welding Protection Package: this welding protection gear set, with a color of yellow, is a handy kit that includes a welding apron, a pair of welding gloves, a pair of welding sleeves, a welding hood and boot covers; This all encompassing package is designed to meet your safety needs and provide full coverage, safeguarding you from welding splashes and intense heat
REPLACEMENT WELDING HELMET HEADGEAR - Jackson Safety's Premium 370 Speed Dial Replacement Headgear offers a perfect fit and secure hold for your welding hood
Reinforced Stitching: Features double stitching with flame-resistant thread and rivet design for enhanced durability and longevity under heavy-duty use.
What to Confirm Before Paying
Ask for a written enrollment cost sheet that answers each of these questions:
- Are the welding helmet, gloves, jacket, safety glasses, and hearing protection supplied or purchased separately?
- Are welding rods, wire, shielding gas, metal coupons, and other consumables included?
- Are books, handouts, and classroom materials included?
- Does tuition include any qualification test, inspection, certification paperwork, or laboratory fee?
- Are retesting and additional practice charged separately?
- What payment methods avoid the 3.5% card charge?
- What charges are refundable if the student cancels or withdraws?
Pro Tip: Compare the written total, not just the advertised tuition. A program with a lower headline price can cost more if equipment, consumables, testing, or required fees are billed separately.
Day vs. Evening Class Pricing and Schedules
Day and evening formats have the same published tuition. The difference is how quickly the training is completed and how many days each week you attend. As checked on August 10, 2026, Knight’s current program page lists the next day training start for August 24 and the next evening training start for August 25.
| Format | Meeting Time | Weekly Days | Program Length |
|---|---|---|---|
| Day | 9:00 a.m.–3:00 p.m. | Monday–Thursday | 4 weeks for MIG, Stick, or TIG; 5 weeks for pipe |
| Evening | 4:00 p.m.–9:30 p.m. | Tuesday and Thursday | 8 weeks for MIG, Stick, or TIG; 10 weeks for pipe |
The day schedule may suit students who can train intensively and want to finish sooner. Evening classes can be easier to combine with a daytime job, but they extend the course over twice as many weeks.
Tuition may be equal, but your indirect costs can differ. A day student may lose more daytime work hours, while an evening student may spend more weeks commuting. Include fuel, parking, meals, childcare, and lost wages when comparing the two formats.
Note: Class start dates can change. Use the current dates on the official program page rather than relying on an older article or advertisement.
Products Worth Considering
Complete Set with Essential Accessories: This package not only includes the high-quality welding apron but also a pair of welding gloves and welding sleeves, offering comprehensive protection. The sophisticated design with ample pocket space ensures practicality and convenience, making it a suitable gift for craftspeople and professionals alike.
Welding Hood Fasteners are key components that connect the motorcycle helmet body to protective gear (flip-up goggles, dust shields, etc.), achieving firm fixation, lifted, and sealing, widely used in factory workshops, construction sites, ship repairs, and motorcycle riding protection.
45.2" Welding Apron,Heavy duty cowhide split leather,solidly built,Anti-flame retardant and soft,fire,wear,insulated
Certification and Testing Expenses
Course tuition and welding certification testing are not necessarily the same charge. Completing a class shows that you finished training. A welder qualification or certification test evaluates your ability to make an acceptable weld under a particular process, material, position, procedure, and code.
Knight’s certification-testing page lists MIG short-circuit, Stick with 6010 and 7018 electrodes, TIG on stainless steel and aluminum, gas-shielded and self-shielded flux-cored welding, 6G pipe, micro etching, visual inspection, and dye-penetrant testing. It does not publish a standard price list.
Warning: Do not assume that the $4,100 or $5,500 tuition includes every certification test. Obtain a written quote that names the exact process, position, code, inspection method, paperwork, and retest policy.
Certification Exam Fees
A legitimate testing quote should identify more than a general credential name. Ask whether the price covers:
- The welding procedure specification or employer-supplied procedure
- The plate or pipe test coupon
- Filler metal, shielding gas, and equipment use
- Visual inspection, bend testing, etching, or another evaluation method
- Test-facility and inspector charges
- Certification records or AWS processing, when applicable
- Practice time before the test
- A retest after an unsuccessful attempt
The American Welding Society Certified Welder program says test pricing varies by Accredited Test Facility, welding process, and qualification requirements. AWS’s 2026 price list separately lists a $70 Certified Welder application fee and a $105 yearly maintenance subscription, while the hands-on Certified Welder exam price must be obtained from the testing facility. These AWS charges are not a Knight School testing quote, so ask Knight for the complete test and retest price in writing.
Retest and Renewal Costs
Retest costs depend on what must be repeated. A new coupon, additional booth time, inspection, destructive testing, or paperwork can all affect the price. Knight does not publish a universal retest fee on its current certification page.
AWS Certified Welder credentials do not follow a simple two-year renewal cycle. AWS says the credential remains active when the welder maintains continuity by submitting documentation every six months for the certified process. AWS also requires an annual WeldCert Pro maintenance subscription; the 2026 AWS price list shows that subscription at $105 per year. If continuity lapses, requalification testing may be required.
Employer qualifications may follow a company procedure or another code and may not transfer automatically to a different employer. Ask which organization owns the qualification record and whether a new employer is likely to require another weld test.
Employer Testing Options
Knight states that custom scheduling is available for employer certification testing and current welders. The public pages do not provide a standard contractor rate or confirm that every test can be conducted at an employer’s job site.
An employer requesting group testing should provide the applicable procedure, code, process, material, thickness, position, acceptance method, number of welders, and preferred schedule. Knight can then quote the work based on the actual testing requirements.
Financial Aid, Scholarships, and VA Benefits
Knight’s public website confirms two funding paths: VA education benefits for eligible students in approved programs and Indiana’s Workforce Ready Grant for qualifying Indiana residents. Federal Workforce Pell Grants became available for approved short-term workforce programs beginning July 1, 2026, but Knight’s public pages reviewed for this update do not state that its specific welding courses have federal Workforce Pell approval. Do not assume Pell Grant, federal-loan, school-scholarship, or universal payment-plan eligibility without written confirmation.
VA Education Benefits
Knight states that it is approved by the Kentucky State Approving Agency for Veterans Education to offer VA education benefits to eligible students enrolled in approved programs.
The amount paid depends on the student’s benefit, remaining entitlement, enrollment status, and whether the selected program is approved. Veterans should obtain a school cost sheet and compare it with their VA eligibility information before enrolling.
Indiana Workforce Ready Grant
Knight promotes the Workforce Ready Grant to Indiana residents. The current Indiana Next Level Jobs program says the grant covers tuition and fees for qualifying certificate programs, and Indiana’s current approved-provider listings include Knight School of Welding under Welding Training.
Current eligibility generally requires the applicant to:
- Be an Indiana resident and a U.S. citizen or eligible noncitizen
- Hold a high school diploma or equivalent
- Have less than a college degree
- Meet applicable state-aid requirements
- Enroll in a qualifying program with an approved provider
Coverage can depend on the program and provider. Equipment, books, consumable supplies, and other noncovered costs may remain the student’s responsibility.
Note: Workforce Pell is now a real federal option for approved short-term programs, but program approval is not automatic. Ask Knight whether your exact course has U.S. Department of Education approval for Workforce Pell before filing or budgeting around federal aid.
Lifetime Job Assistance and Employment Support
Knight advertises lifetime employment assistance for graduates. This support adds value to the training, but it is not a job guarantee.
Lifetime Job Placement Help
The school’s Career Services page lists employment leads and searches, resume preparation, employer weld-test preparation, and on-campus employer recruitment.
Knight also says it can help graduates brush up on existing skills in the future. The page does not state that this support includes free refresher courses, unlimited booth time, or guaranteed interviews.
Resume and Interview Prep
A welding resume should clearly list the processes, materials, positions, equipment, safety training, and qualification tests the applicant can document. Knight says it helps graduates prepare resumes and get ready for employer weld tests.
Because many welding employers use practical tests, students should keep copies of course records and clearly distinguish school completion from any separate employer or code qualification.
Employer Networking Connections
Knight reports that employers visit the school and recruit graduates. Its current employer-partnership page names companies and organizations such as Kentucky Trailer, Lantech, Iron Workers Local 70, Wirecrafters, Louisville Exchanger, and Falls City Industrial among employers that recruit Knight graduates.
An employer connection may create an opportunity, but the employer still controls its application, interview, background-check, experience, and welding-test requirements.
Note: Knight explicitly states that it provides job assistance but cannot promise employment placement. Treat career services as support rather than a guaranteed return on tuition.
Comparing Knight School With Other Welding Programs
Knight’s main advantage is its short, process-specific format. However, a fair comparison requires more than placing one school’s tuition beside another school’s advertised price. For broader context, a July 2026 Trade Schools Review dataset reports a median listed welding-program tuition of $5,136 across 464 programs with published tuition. Knight’s $4,100 basic-process tuition is below that benchmark, while its $5,500 pipe-course tuition is slightly above it, but program length, hands-on hours, equipment, and testing inclusions vary widely. For a wider cost baseline, see our welding school cost guide.
Use the same questions for every program:
| Comparison Factor | What to Check |
|---|---|
| Total program price | Tuition, registration, laboratory, equipment, consumables, books, testing, and card charges |
| Training time | Total clock hours, booth time, instructor access, and program length |
| Processes taught | MIG, Stick, TIG, flux-cored, pipe, fabrication, blueprint reading, and safety |
| Credential outcome | School certificate, AWS credential, employer qualification, or college credit |
| Student support | Resume help, employer recruitment, test preparation, and graduate practice policies |
| Indirect expenses | Travel, housing, meals, childcare, parking, and lost work time |
A longer program may cover several welding processes, fabrication, drawings, and general education. Knight’s courses focus on one primary process or pipe specialty over a shorter period. Decide whether you need a fast skill course, several separate process courses, or a broader diploma or degree.
Pro Tip: Divide the complete program price by verified hands-on training hours. Then compare what credential, equipment, testing, and career support each school includes.
Frequently Asked Questions
Do alumni receive discounts for refresher courses?
Knight says it can help graduates brush up on their skills, but its public Career Services page does not publish an alumni discount or promise free refresher training. Any booth time, consumables, instruction, or testing charges should be confirmed in writing.
Is on-campus housing available for out-of-town students?
Knight’s current public website does not advertise dormitories or on-campus housing. Out-of-town students should budget for independent lodging, transportation, meals, and the commute to the Louisville campus.
Are supplies refundable if I withdraw early?
The school’s public pages do not state a supply-refund policy. Refund rights and deadlines should be stated in the signed enrollment agreement. Review whether opened, issued, consumed, or personalized equipment is nonrefundable before classes begin.
Do courses include instruction on robotic welding?
Robotic welding is not listed in Knight’s current public course descriptions. The advertised programs focus on MIG, Stick, TIG, 6G pipe, and TIG pipe skills. Students seeking robot programming, automated cells, PLCs, or seam tracking should choose a program that specifically lists those subjects.
Is there a payment plan with no interest?
Knight’s public About page lists accepted payment methods and a 3.5% credit and debit card charge, but it does not publish a no-interest installment plan. Do not assume one is available without receiving the payment dates, fees, late-payment rules, and cancellation terms in writing.
How much does Knight School of Welding cost if I pay by card?
Based on the published 3.5% card charge, paying all tuition by card would make a $4,100 program cost $4,243.50 and a $5,500 program cost $5,692.50 before testing or other expenses.
Are certification tests included in tuition?
The public tuition page does not clearly state that every certification or qualification test is included. Request a written cost sheet that identifies the test procedure, code, coupon, inspection, documentation, practice time, and retest fee.
Can veterans use GI Bill benefits at Knight?
Knight states that eligible students enrolled in approved programs may use VA education benefits. Actual coverage depends on the student’s eligibility, remaining entitlement, program approval, and enrollment details.
How long does Knight School of Welding take?
MIG, Stick, and TIG programs run 4 weeks during the day or 8 weeks in the evening. The 6G Pipe Uphill and TIG Stainless Pipe programs run 5 weeks during the day or 10 weeks in the evening. Day classes meet Monday through Thursday, while evening classes meet Tuesday and Thursday.
Does Knight School of Welding accept Pell Grants?
Knight’s public funding pages reviewed on August 10, 2026 do not state that its specific courses are approved for federal Pell or Workforce Pell. Workforce Pell can cover approved short-term workforce programs, but school and program approval must be confirmed. Ask Knight for written confirmation for your exact course before relying on Pell funding.
Conclusion
Knight School of Welding currently charges $4,100 for MIG, Stick, or TIG training and $5,500 for its two advanced pipe programs. Day and evening formats have equal tuition, although the schedules and indirect costs differ. Add the school’s 3.5% card charge when applicable, and obtain written prices for equipment, certification testing, retesting, and withdrawal terms. Eligible veterans and Indiana residents may have funding options, while lifetime career assistance provides support without guaranteeing employment.
Sources
- Knight School of Welding Training Programs — published tuition, course lengths, class schedules, and pipe-course prerequisites
- Knight School of Welding About Page — accepted payment methods and the 3.5% credit/debit card charge
- Knight School of Welding Certification Testing — available welding processes, test positions, and inspection methods
- Knight School of Welding Military Veterans — approval to offer VA education benefits to eligible students in approved programs
- Knight School of Welding Career Services — lifetime employment assistance and the school’s no-placement-guarantee statement
- American Welding Society Certified Welder Program — testing-cost variables, retesting, and six-month certification maintenance
- AWS Certification and Education 2026 Price List — Certified Welder application and yearly maintenance-subscription fees
- Indiana Workforce Ready Grant Available Job Training — Knight School of Welding listed as a Welding Training provider
- U.S. Department of Education Workforce Pell Final Rule Announcement — Workforce Pell availability beginning July 1, 2026 for approved short-term programs
- Trade Schools Review Welding School Cost Dataset — July 2026 median tuition benchmark across programs with published tuition
